(647) 343-6595  | info@directseparation.ca 
 
 

COOLANT & WASH WATER

Extending the life of Metalworking Fluids and reducing airborne bacteria in your facility saves money. Coolant costs are always rising so making it last longer saves money.

Longer lasting coolant also means paying less to dispose of it. Less frequent change-outs reduces machine down time and cleaner coolant means better quality product and eliminates bacteria and foul odour. An inexpensive, durable and efficient Abanaki Oil Skimmer removes the tramp oil and solves all these issues at once.

Mighty Mini® Oil Skimmer

Mighty MiniThe ideal solution to remove unwanted oil in coolants & parts washers!

Effective: The 1" (2.5cm) wide model removes up to 1 gallon (3.8 litres) of oil per hour. The 2"(5cm) wide model has a removal capacity of 2 gallons (7.6 litres) of medium weight oil per hour.

Compact. Use it almost anywhere...even through a 2" (5cm) diameter bunghole in a drum.

Portable. Use it here today, there tomorrow. Weighs only 7 pounds (3.2 kilograms), installs in seconds and runs on 110v. power. 220v motor available.

Complete. Put it to work right out of the box, or add the optional, easy-to-install decanter and brackets for an even more efficient system.

Durable. Includes a long-life fan-cooled motor, sturdy 304 stainless steel construction and integrated 24 hour timer. Every Abanaki® skimmer is backed as well as it's built.

Each Mighty Mini comes with a 1 year manufacturer's warranty and Direct Separation Solution's 30-Day Satisfaction Guarantee.

  • Fan-cooled motor.
  • 1"(2.5cm) and 2"(5cm) wide stainless steel or specially-engineered plastic belts.
  • Both sides of belt are wiped for better efficiency.
  • 304 stainless steel base and housing.
  • Spring-loaded stabilizer bar.
  • 3-foot (91cm) clear discharge hose and clamp.
  • 8-foot (2.4 meter) grounded power cord w/plug.
  • Integrated 24 hour timer.

SEE IT IN ACTION:


TubeTastic! Oil Skimmer

TubeTastic! Oil SkimmerThe Abanaki® TubeTastic! oil skimmer can be used on machining centers with little or no access to the coolant sump from above. This unit can skim oil from chip conveyors or even totally enclosed machining centers.

  • Fan-cooled continuous duty motor.
  • Oil pickup rate of up to 1 1/2 g.p.h. (5.6 litres per hour).
  • Works in places where other skimmers can't.
  • Standard tube lengths in reach: 6", 12", 18" and 24" (15cm, 30cm, 45cm, 60cm)

SEE IT IN ACTION:


Mighty Disk Oil Skimmer

Mighty DiskThe inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki®!

Effective. Has a removal rate of up to 1 1/2 gallons (5.6 litres) of medium weight oil per hour.

Compact. Use it almost anywhere a flat surface is available for mounting.

Portable. Weighs less than 10 pounds (4.5 kilograms), installs in no time, and runs on 110v power.

Complete. Put it to work right out of the box or add the optional coolant saving decanter for a more efficient skimming system. Stainless steel model with built-in timer also available.


Tote-It® Oil Skimmer

Tote-ItThe Tote-It®'s patented design is a dependable and effective means of removing oil from water. The single assembly unit can be used in any application where 115 VAC, 60 Hz power is available.

The Tote-It® utilizes a continuous belt and wiper to remove up to 12 gallons (45 litres) of oil per hour from the fluid surface. The belt operates on a motor and pulley system attached to a stabilizer bar that is immersed in the contaminated liquid. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt, and discharged through a 1-1/4 in. (3.175cm) ID hose. The tail pulley has flanges which allow it to roll freely on the inside of the belt without becoming dislodged. It does not need to be fastened to the tank.

Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid.

The Tote-It® is especially well suited for parts washing and machining center applications. By removing surface oil from a wash tank, the parts will not be recontaminated as they are withdrawn. Removing tramp oil from a coolant tank prevents excessive smoke and fumes due to oil burning during cutting operations. It also reduces bacteria growth in the tank, along with the resulting odor.

Where to Use It

The Tote-It® is designed for those applications where multiple tanks can take advantage of a single portable unit. It also can be used in permanent installations with limited access areas, such as small parts washers and machining center coolant tanks. Typical applications include:

  • Wastewater sumps
  • Parts washers
  • Coolant systems
  • Heat treating fluids
  • Food processing plants
  • Parking lots, garages, and service facilities
  • Aircraft service areas and tarmac runoff
  • Truck, locomotive, and other mobile equipment washing facilities
  • Marine Vessel Bilgewater Applications

SEE IT IN ACTION:

  

 
 
 

Copyright © 2015 Direct Separation Solutions. All Rights Reserved.